PN10 Flanges-manufacture,factory,supplier from China

PN10 DN250 WeldNeck Flanges have several advantages and characteristics.Pressure Rating:Advantages of PN10 DN250 WeldNeck Flanges:High Pressure Resistance: PN10 rating implies that these flanges can withstand a maximum operating pressure of 10 bar, making them suitable for high-pressure applications.Increased Safety: WeldNeck flanges have a long tapered hub that provides excellent reinforcement and reduces the risk of leakage or failure under high-pressure conditions.Improved Fluid Flow: The smooth transition from the flange to the pipe reduces turbulence and pressure drop, ensuring efficient

PN10 DN600 WeldNeck Flanges have several advantages and characteristics.Pressure Rating:Advantages of PN10 DN600 WeldNeck Flanges:High Pressure Resistance: PN10 rating implies that these flanges can withstand a maximum operating pressure of 10 bar, making them suitable for high-pressure applications.Increased Safety: WeldNeck flanges have a long tapered hub that provides excellent reinforcement and reduces the risk of leakage or failure under high-pressure conditions.Improved Fluid Flow: The smooth transition from the flange to the pipe reduces turbulence and pressure drop, ensuring efficient

The GOST 12820-80 standard is a set of technical requirements and specifications established by the Russian standardization authority. This standard ensures the compatibility of flanges produced by different manufacturers, allowing for interchangeability and easy installation. GOST 12820-80 flanges are manufactured with precise dimensions and tolerances, ensuring a perfect fit and eliminating the risk of leaks or failures.One of the key advantages of PN10 flanges, in accordance with the GOST 12820-80 standard, is their versatility.

PN10 refers to the pressure rating of the flange, which is 10 bars. DN50 refers to the nominal diameter of the flange, which is 50 millimeters.

PN10 refers to the pressure rating of a pipe or fitting, indicating that it can withstand a maximum pressure of 10 bar. DN300 refers to the nominal diameter of the pipe or fitting, which is 300 millimeters.

PN10 refers to the pressure rating of the flange, which means it can withstand up to 10 bar of pressure. DN1400 refers to the size of the flange, which has a nominal diameter of 1400 mm (or approximately 55 inches).

PN10 refers to the pressure rating for the flange, which is 10 bar (145 psi). DN80 refers to the nominal diameter of the pipe that the flange is designed to connect to, which is 80 mm (approximately 3 inches).

PN10 DN250 Russian Standard Flange refers to a particular type of flange that is commonly used in Russia for pipelines. The term PN10 stands for "Pressure Nominal 10," which refers to the maximum allowable pressure that the flange can handle. In this case, PN10 indicates that the flange can handle a maximum pressure of 10 bar or 145 psi.The DN250 refers to the nominal diameter of the flange, which is 250 millimeters or approximately 10 inches in diameter.

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

A PN10 DN50 flat flange is a type of flange that has a flat surface and is designed to fit pipes with a nominal diameter (DN) of 50 mm. The PN10 rating means that the flange can withstand a maximum pressure of 10 bar (145 psi) at specific operating temperatures and fluid types. These flanges are typically made of materials such as carbon steel, stainless steel, or aluminum and are commonly used in piping systems for water, gas, and steam applications.

The manufacturing method for a PN10 DN30 Sliding Flange includes a collection of steps:Material selection: The flange is normally made from a long lasting and corrosion-resistant material, such as stainless metal or carbon steel.Cutting and shaping: The chosen cloth is reduce into the preferred structure and measurement the use of specialised slicing equipment and machinery.

PN10 DN50 Slip-On FlangeOur CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

PN10 DN50 flat flange is a flange used in piping systems.  PN10 refers to the pressure rating of the flange, which means that it can withstand a maximum pressure of 10 bar or 145 psi.  DN50 indicates the nominal diameter or size of the pipe that the flange will use, which is 50mm.  A in place.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

The flat design of the PN10 DN200 Flat Flangeensures a tight seal between two connected components. This flange type is commonly used in applications that require easy alignment and assembly, providing a seamless connection without any protruding parts.

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

PN10 DN200 Flat Plate Flange refers to a type of flange that has a flat surface and is designed to connect pipes with a diameter of 200 mm in a PN10 (pressure rating of 10 bar) piping system. This type of flange is commonly used in water supply, chemical, and industrial applications. It is often made of stainless steel or carbon steel and can come in various shapes, including round, square, and rectangular.

Our CompanyJin Runyuan Flange of Shandong Machinery CO., LTD is a professional manufacturer of forging flanges. Established in 2001, the company is located in the famous "township of the blacksmith" in Shandong Jinan chapter grave area set street agency headquarters. The location offers convenient transportation and a beautiful environment.Covering an area of 20,000 square meters, Jin Runyuan Flange is dedicated to producing high-quality flanges. The main product range includes Japanese standard, American standard, and German standard flanges.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd is a professional manufacturer of forging flanges located in the famous "township of the blacksmith" in Shandong, China. Our company was founded in 2001 and covers an area of 20,000 square meters. We specialize in producing flanges in Japanese, American, and German standards, and we also offer customized production based on customers' drawings or samples.With fixed assets worth 40 million, our annual output reaches 40 million tons.

Our CompanyJin Runyuan Flange of Shandong Machinery CO., LTD is a professional manufacturer of forging flanges. Established in 2001, the company is located in the renowned "township of the blacksmith" in the Shandong Jinan chapter grave area set street agency headquarters. The location offers convenient transportation and a beautiful environment.Covering an area of 20,000 square meters, the company has amassed fixed assets worth 40 million and has an annual output of 40 million tons of flanges.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd. is a professional manufacturer of forging flanges. The company is located in the renowned "township of the blacksmith" in Shandong Jinan Chapter Grave Area Set Street Agency Headquarters, offering convenient transportation and a beautiful environment. Established in 2001, the company covers an area of 20,000 square meters. Their main products include flanges of Japanese standard, American standard, and German standard. They can also customize products according to customer drawings or samples.

Our CompanyJin Runyuan Flange of Shandong Machinery CO., LTD is a professional manufacturer of forging flanges. The company was founded in 2001 and is located in the Shandong Jinan chapter grave area of China.The company covers an area of 20,000 square meters and has existing fixed assets worth 40 million. They have a strong technical force and professional experience, supported by advanced forging machinery processing, assembly, inspection, and packaging production lines.